Atlac® 580 ACTVinyl ester urethane resin used for components and skin coats in Marine applications
Atlac® 580 ACT resin is broadly used for making fiber reinforced components through Hand lay-up and Spray-up processes. Skin coats based on Atlac® 580 ACT resin provide a unique combination of hydrolysis resistance, thermal stability, and ductility.
The Atlac® 580 ACT resin has been certified by Lloyd's Register and RINA for use in Marine.
Atlac® 580 ACT resin is broadly used for skin coats in the manufacturing of boats and vessels. Components made with Atlac® 580 ACT show excellent hydrolysis resistance and good thermal stability, and are resistant to many aqueous media, acidic salts, alkaline media and to hot water. The resin offers an outstanding combination of heat resistance and flexibility.
Atlac® 580 ACT has excellent wet out and de-aerating properties for easy processing. Compared to conventional Vinyl ester resins foaming with MEK peroxide is highly reduced in Atlac® 580 ACT, resulting in reduced air inhibition both inside the laminate and at the surface.
The resin features enhanced thixotropic behavior preventing rinse off inclined mold surfaces, and shows an improved compatibility with aramid fiber reinforcements. The resin provides low exothermic reaction during cure allowing thick sections to be fabricated in one go. At the same time, through cure in thin laminates is favored by excellent curing characteristics.
Certifications and Approvals
Cured non-reinforced Atlac® 580 ACT conforms to type 1310 according to DIN 16946/2. According to EN13121/1 Atlac® 580 ACT is classified group 7B. The resin is certified by Lloyd's Register and Registro Navale Italiano (R.I.Na.) as laminating resin for use in Marine applications.
Easy processing through excellent de-aeration and fiber wetting
Excellent hydrolysis resistance
Certified by Lloyd's Register and RINA
Unique combination of thermal resistance and ductility
- Hand lay-up/spray-up
- Building & Construction
Get product details
You can find detailed information about Atlac® 580 ACT in the product datasheet.Request datasheet
Contact us for more information
Or do you require assistance in selecting the right resin for your project?Contact us
Isophthalic polyester resin for Tanks and Pipes applications
- Synolite™ 5700-P-1
Multi-purpose Hand lay-up resin with Low Styrene Emission capability
- Palatal® A 400-01 FC
Isophthalic resin used for Food Contact applications and as base for Gelcoats
- Atlac® 590
High heat Novolac Vinyl ester resin for demanding corrosive environments